PROFESSIONAL R&D TEAM
AquaCrest has professional experienced R&D team which have access to an advanced laboratory and are always pursuing the best product quality.
Installation is quite easy. You don't need to use tools, all you need to do is to follow our installation instructions.
This filter is made from coconut shell carbon, which, of the unique pore structure of this carbon, is well-suited for chemical adsorption, including VOCs, while reducing chlorine and chemicals that contribute to taste and odor.
BETTER WATER MAKES BETTER LIFE
AquaCrest makes better life. With AquaCrest filters, it’s easier than ever to enjoy better tasting water that’s better for you. AquaCrest filters cut the taste and odor of chlorine while reducing impurities that can adversely affect your health over time.
|Used In Brands||GE|
|Primary Filter Media||Activated Carbon Block|
|Filter Life (gallons)||750|
|Filter Life (liters)||2839|
|Filter Life (months)||6 months|
|Operating Pressure (psi)||20 - 100|
|Operating Temperature (°F)||33 - 100|
|Operating Temperature (°C)||0.6 - 38|
|Flow Rate (gpm)||0.5|
|Flow Rate (lpm)||1.9|
|Warranty Guarantee||Unconditional Product Guarantee for Life of the Product|
1. Turn off the icemaker.
2. Remove the filter canister from the manifold by rotating the canister to the left about 1/3 turn.
(*Note: A small amount of water from the tubing between the filter and refrigerator may come out.
A small towel should be able to catch it.)
3. Install the new filter canister into the manifold by turning it to the right about 1/3 turn until the alignment marks line up and the filter stops. DO NOT overtighten. The filter will raise up as it is turned.
4. Cycle the water dispenser or run optional valve for 4 gallons (flush approximately 5 minutes) to flush out any harmless carbon fines that may be present.
5. Turn on the icemaker.