The carbon components used in Waterdrop filters could contribute to the reduction of chlorine taste and odor while retaining minerals beneficial to health.
With an NSF certified water filter, you can rest assured that you are getting only the best of the best. These water filters are put through rigorous testing to ensure that only the purest, freshest water.
Unique, premium coconut carbon block gives you fresh water and leaves beneficial minerals which may be beneficial to health.
Every time you purchase a Waterdrop filter, you’ll provide a child with One Day supply of clean water. Starting March 22. 2017, Waterdrop will donate part of profit from every purchased filter to help build water projects and sanitation facilities.
|Used In Brands||Whirlpool /KitchenAid / Kenmore|
|Primary Filter Media||Activated Carbon Block|
|Filter Life (gallons)||200|
|Filter Life (liters)||757|
|Filter Life (months)||6 months|
|Micron Rating (Nominal)||0.5|
|Operating Pressure (psi)||30 - 100|
|Operating Temperature (°F)||33 - 100|
|Operating Temperature (°C)||0.6 - 38|
|Flow Rate (gpm)||0.5|
|Flow Rate (lpm)||1.9|
|Certifications||Filter cartridge has been Tested and Certified by NSF International against NSF/ANSI 42 for materials and structural integrity requirements|
|Warranty Guarantee||Unconditional Product Guarantee for Life of the Product|
1. Locate filter below the refrigerator. Slowly turn the cartridge 1/4 turn counter-clockwise and remove. Remove knob from old filter.
2. Remove all packaging, and protective cap from new filter.
3. Slide knob from old filter onto new filter. Insert filter into refrigerator and turn 1/4 turn clockwise until it is firmly seated.
4. Run water for 3 minutes through the dispenser to flush the filter.
NOTE: Initial flow rate may be slower than expected. Full flow rate should be restored within 24-36 hours